Napoleon Woodland Series 18-Inch Electric Log Set - NEFI18H

Overall Dimensions: 18 in. W x 13-1/2 in. H x 13 in. D (Napoleon manual)

The Napoleon Woodland 18 (NEFI18H) is an 18 in. electric log set that turns an unused masonry fireplace into a working electric fireplace without a gas line or chimney work. Hand-painted resin logs glow over an LED ember bed while the flame image is projected behind them, and a fan-forced heater adds up to 1,500 W of supplemental heat from a standard 120V outlet.

Features

• Plug-and-play electric log set for an existing masonry fireplace opening
• Hand-painted resin logs over an LED ember bed, with flames projected onto the surface behind the set
• Fan-forced heater: blower only, low heat or high heat, 1,500 W max on 120V
• Thermostat with 7 settings from 61 F to 85 F, plus a 30 minute to 6 hour timer
• 5 flame and ember light settings, including ember glow with the flame off
• Multi-function remote, heater lock and plug-in or hardwired connection

Key Specifications

Dimensions and Cutout

What Is Included and What You Will Need

• Included: NEFI18H log set with logs, ember bed and charcoal embers, and the multi-function remote, per the Napoleon manual
• Required: an existing fireplace opening at least 14 in. H x 18 in. W x 14 in. D
• Required: a dedicated 15 A, 120V grounded outlet, or hardwiring by an electrician

Installation Notes

Clean the firebox, seal chimney drafts with non-combustible material and cap the flue, then set the log set about 2 in. from the rear wall for the best flame effect. Napoleon requires a minimum cavity of 14 in. H x 18 in. W x 14 in. D and a dedicated 15 A, 120V grounded outlet; extension cords are not permitted, and hardwiring must be done by a qualified electrician. Keep furniture and curtains at least 36 in. from the front. Electric fireplaces need no gas line or venting, which makes them a practical choice for New York City apartments and co-ops, subject to building or board approval for any electrical work.

Book a design consultation to plan an electric conversion of an old fireplace.

Documentation

• Napoleon Woodland NEFI18H Installation and Operation Manual W415-1654

Frequently Asked Questions

Will it fit my fireplace?

Napoleon requires a cavity of at least 14 in. H x 18 in. W x 14 in. D. Measure the opening, not the face of the surround.

Does it need venting or a gas line?

No. It is electric and plugs into a standard 120V outlet, or it can be hardwired.

Can I run the flames without heat?

Yes. The heater is controlled separately and can be locked off, so the flame and ember lights run on their own.

How much heat does it make?

The heater draws up to 1,500 W on high, supplemental heat for one room.

Related reading: Electric fireplace buying guide, How to measure a fireplace opening.

Warranty

Napoleon Electric Appliance Standard Warranty, per the Napoleon manual: Napoleon supplies replacement electrical components and wearable parts (fan/heaters, motors, switches, nylon bearing components, remote controls and LED lights) free of charge for the first year. Light bulbs and fuses are not covered, and labor for warranty repair is not covered. Coverage is for the original purchaser, begins on the date of original installation and is not transferable.