Amantii Symmetry Xtra Tall Bespoke 88" Indoor/Outdoor Electric Fireplace

Overall Dimensions: 90-1/4" W x 12" D x 21-3/8" H (with trim)

The Amantii Symmetry Xtra Tall Bespoke 88 (SYM-88-XT-BESPOKE) is an 88-inch built-in linear electric fireplace with a 17-5/8" tall viewing opening, noticeably taller than the standard Symmetry, so the flame reads well from across a large room. It is made for a family room media wall, a primary suite or a covered patio, since Amantii rates the Symmetry Bespoke series for outdoor areas protected from direct water. The value is in the clean-face look, a fully adjustable flame and ember bed, and a heater that doubles to 3,000 W when wired for 240V.

Key Specifications

Dimensions and Cutout

Features

• Xtra Tall 17-5/8" viewing height for a deeper flame picture than the standard Symmetry
• Three flame speeds and six flame brightness levels
• Ember bed with adjustable color channels, a dynamic mode and 7 brightness levels
• Ten mood light colors for the firebox interior
• Thermostatic heat with two heater levels; flame runs with heat off
• Timer from 30 minutes to 8 hours
• Wi-Fi control through the Tuya Smart app, plus remote and front touch panel
• Rated for covered outdoor installation when Amantii's overhang rule is met

What Is Included and What You Will Need

• Included: Symmetry Xtra Tall Bespoke 88 firebox with trim and glass front, small clear glass media, power cord, multi-function remote; a deluxe log or ice media kit only if selected above
• Required: a grounded 15A, 120V branch circuit, preferably dedicated; 240V operation must be hardwired by a qualified electrician
• Required: a framed wall opening 89-1/4" W x 20-1/4" H x 12-1/2" D, leaving at least 1/4" around the unit
• Optional: deluxe log kits (driftwood, birch, rustic, split log, oak, Timberlux real wood) or ice and diamond media, selectable above

Installation Notes

Frame the opening to the table above; the unit fastens to the framing with screws through each side after the trim is test-fitted. It ships with a 120V cord, and hardwiring at 120V or 240V is done at the junction block behind the top right rear cover plate by a licensed electrician; never use an extension cord. Keep curtains, furniture and other combustibles at least 3 ft from the front. Outdoors, Amantii requires a rain protection overhang extending at least half the height from the fireplace base to the roofline, to the front and both sides, and all wiring to meet local code. Indoors, with no vent or gas line, it is a practical choice for New York City apartments and townhouses. Book a design consultation and we will plan the opening, circuit and finish with your contractor.

Documentation

• Spec Sheet
• Installation Manual

Frequently Asked Questions

Can the Symmetry Xtra Tall Bespoke 88 go outside?

Yes, in an outdoor area protected from direct water. Amantii requires an overhang that projects at least half the roofline height over the front and sides of the unit.

Does it plug in or need to be hardwired?

It ships with a 120V cord for a grounded outlet on a 15A circuit. Hardwiring is optional at 120V and required for 240V, which doubles heat to 3,000 W.

What is the difference from the standard Symmetry Bespoke?

The Xtra Tall firebox has a 17-5/8" high viewing opening and a 21-3/8" tall trim face, giving a taller flame picture in the same 12" depth.

What media comes with it?

Small clear glass media is included. Log kits and ice or diamond media are optional and can be chosen in the options above.

Related reading: Electric Fireplace Buying Guide and Fireplace Mantel and Media Wall Guide.

Warranty

Amantii 2-year limited warranty from the date of first purchase against manufacturing and material defects, for the original purchaser, per the Symmetry Xtra Tall Bespoke manual. Amantii replaces defective parts or products during the warranty period.