American Fyre Designs Cosmopolitan Square 60-Inch Dining Height Gas Fire Table

The American Fyre Designs Cosmopolitan Square Dining Firetable brings a real fire feature up to dining height, so a full table of guests can eat, drink and stay warm around the flame instead of pulling chairs toward a low fire pit. At 60 inches square with a 29 inch dining-height top, it gives every seat usable table surface around a centered 16 inch stainless steel star burner. Each table is handcrafted in the USA from glass-fiber reinforced concrete and finished by hand, so no two are identical.

Why this table

• True dining height, not a chat table. 29 inches tall and 60 inches square, sized for standard dining chairs and a genuine sit-down meal around live fire.
• Handcrafted GFRC that lives outdoors. Glass-fiber reinforced concrete combines alkali-resistant glass fiber with an acrylic polymer for a material that holds fine detail and stands up to weather, available in seven hand-applied finishes.
• Propane tank hides inside. A 20 lb (5 gallon) DOT tank sits inside the base behind a removable access door with a tank retention frame, so there is no tank sitting beside your table.
• Choose your ignition. The manual flame-sensing control valve is match-free with a spark igniter and shuts the gas off if it stops sensing flame. The optional FyreStarter upgrade adds Bluetooth control from your phone, a higher 75,000 BTU output and a 32,000 BTU low setting, plus a built-in USB-A and USB-C fast-charging outlet.
• Certified for outdoor use. Listed to ANSI Z21.97 / CSA 2.41 for outdoor decorative gas appliances, and rated for commercial as well as residential installation.

Specifications

What's included

• GFRC firetable body in your selected finish
• 16" stainless steel star burner and 28" square burner pan
• Manual flame-sensing control valve with spark igniter, or the FyreStarter control module, transformer and Bluetooth receiver on H6 models
• Flexible gas connector
• Propane tank access door with tank retention frame
• Lava granules for the required base media layer
• Installation and owner's manual

Required: decorative fire media

This is the step most buyers miss, so it is worth being precise about. The lava granules that ship with the burner are a base layer only. They fill the burner area up to the top of the burner and are required for correct operation. You then need decorative media purchased separately to cover the burner itself.

American Fyre Designs recommends roughly 25 lbs of lava granules or lava coals, or 40 lbs of fire glass or fire gems for this table. If you order the FyreStarter version, note that media quantities are set for running on the low setting, so plan on additional fire glass if you intend to run it high most of the time.

We carry the matching American Fyre Designs media: Fyre Glass, Reflective Fyre Glass, Fyre Gems, Diamond Nuggets, lava granules and lava coals. See the linked products below.

Optional accessories

• Vinyl protective cover 8137A, cut for the 642
• GFRC cover 8123-xx in a matching finish, or 8123-FO / 8123-SP for the reclaimed wood tables
• Large Square Wind Guard 8210-WG, 28" W x 28" D x 6¾" H tempered glass, sized for the 642

Documentation

• Installation and Owner's Manual (L-H2-058), covers gas supply pressures, clearances, media placement and the full parts list for the 642
• FyreStarter Bluetooth Control Instructions (L-H2-067), pairing and app setup, applies to H6 FyreStarter models only

Warranty

American Fyre Designs warrants its exterior GFRC fire features and accessories for three (3) years. All American Fyre Designs valves, burners, electrical components and controls (excluding batteries) are warranted for one (1) year. Wind guards, screens and batteries are excluded. The warranty does not cover damage caused by burning wood or any fuel other than the natural gas or propane the unit is configured for, or damage and discoloration caused by high wind conditions. Do not burn real logs in this appliance.