Majestic Lanai 72" Outdoor Linear Vent Free Gas Fireplace

Overall Dimensions: 76-1/8 in. W x 39-1/2 in. H x 13-3/8 in. D

The Majestic Lanai 72 (ODLANAIG-72) is the largest single-sided model in the Lanai outdoor vent-free linear series, made for rooftop terraces, long patio walls and outdoor rooms where a 72-inch ribbon of flame needs to hold its own against the architecture. A stainless steel interior reflects the flame and the crushed glass bed, multicolor LED lighting keeps it glowing after dark, and there is no chimney or vent to build.

Key Specifications

Dimensions and Cutout

Features

• 72 in. linear flame, the widest in the Lanai series
• Outdoor vent-free design certified to ANSI Z21.97, so no chimney or flue is needed
• Multicolor LED lighting under the glass bed
• Stainless steel interior reflects and magnifies the flame
• IntelliFire ignition monitors ignition for safe operation
• Weatherproof wall control runs the fire and changes the LED colors
• Glass wind guard keeps the flame pattern steady
• Optional driftwood log set and stone kit (selectable above)

What Is Included and What You Will Need

• Included: fireplace with burner, IntelliFire ignition, LED lights, glass wind guard, weatherproof wall control with wire and junction box, gas flex connector
• Required: crushed glass media, chosen in the Glass Media option above (Crystal is standard)
• Required: framing and noncombustible finish built to the framing dimensions, a gas supply sized for the appliance, and a GFCI-protected 120 VAC circuit
• Optional: driftwood log set (CDLS), stone kit, drain pan (ODLANAIG-72DP)

Installation Notes

This is an outdoor vent-free appliance listed to ANSI Z21.97 for outdoor decorative gas appliances; it must never be installed indoors, in a garage or in any enclosed area. Majestic defines an outdoor space as no more enclosed than walls with no roof, a roof with no more than two side walls, or a roof with three walls and at least 30% of the perimeter permanently open. Keep at least 39 in. to the ceiling and 36 in. to any combustible object, and run power from a GFCI-protected circuit. Installation should be done by a qualified, factory-trained or NFI-certified gas technician. For New York City addresses, including rooftop terraces, outdoor gas fireplaces and their gas piping fall under the NYC Fuel Gas Code and Department of Buildings permitting, so the approval path for this vent-free unit must be confirmed before you buy. We review that, along with Long Island, Westchester and New Jersey sites, during a design consultation.

Documentation

• Installation Manual (Lanai 48/60)
• Owner's Manual (Lanai 48/60)

Frequently Asked Questions

Can the Lanai 72 go on a NYC rooftop terrace?

It is certified for outdoor use only, and any NYC installation of an outdoor gas fireplace must clear the NYC Fuel Gas Code and Department of Buildings process, plus building management approval on a rooftop. Confirm the approval path with us and a licensed master plumber before ordering.

Is the glass media included?

The fireplace needs crushed glass to operate. Crystal is the standard choice in the options above; Scarlet, Ebony, Cobalt and Amber are upgrades.

How much wall do I need?

The framed opening is 76-3/4 in. wide, 39-3/4 in. high and 13-3/8 in. deep, with at least 39 in. of clearance to the ceiling.

Related reading: Outdoor Fireplace Buying Guide and Vent-Free vs. Direct Vent Gas Fireplaces.

Warranty

Per the Lanai series owner's manual, Outdoor Lifestyles by Hearth & Home Technologies provides a Limited Lifetime Warranty on the product body, metal firebox and heat exchanger. Gas and electrical components, gaskets, glass and media (thermal breakage), optional accessories and labor for warranty service are covered for one year from installation. Coverage requires purchase through an authorized dealer and applies at the original installation site.