Real Fyre Charred Angel Split Oak Gas Log Set with 3-Tiered G31 Burner System

Overall Dimensions: log set sizes 18/20 in., 24 in., 30 in.; minimum fireplace opening depends on size (see table below)

The Real Fyre Charred Angel Split Oak vented gas log set (CHNS) pairs hand-painted refractory ceramic logs with Real Fyre's three-tier G31 burner, built for an existing wood-burning fireplace with a working chimney. It is for homeowners who want the look of a real charred split oak fire without hauling wood or cleaning ash.

The G31 burner stacks three rows of flame for a tall, full fire, and each log has steel rods cast inside for strength. Choose the size, gas type and ignition above, from a simple match-lit burner to electronic ignition with a variable-flame remote.

Key Specifications

Dimensions and Cutout

Features

• Three-tier G31 burner for a tall, full-bodied flame
• Hand-painted refractory ceramic logs with high-definition bark detail
• Steel rods cast inside each log for reinforcement
• Sized 18/20 in., 24 in., 30 in. to fit common fireplace openings
• Glowing embers and Bryte coals in the burner kit
• Damper clamp included to keep the required permanent vent opening
• Ignition choices from match lit to electronic variable remote

What Is Included and What You Will Need

• Included: log set; with a burner option, the G31 burner pan with glowing embers, Bryte coals and damper clamp, plus the valve and ignition you select
• Logs only option above if you already have a compatible Real Fyre burner
• Required: an existing, working wood-burning fireplace and chimney, cleaned and inspected by a qualified chimney professional
• Required: gas line to the fireplace with a shutoff, run by a licensed gas installer (no rubber hose or flex connector into the firebox)
• Batteries for remote and electronic systems as listed in the manual

Installation Notes

Real Fyre G31 burners may only be installed in a wood-burning fireplace that meets the minimum firebox sizes above and the venting table in the manual: for example, a 15 ft chimney needs a permanent damper opening of 24 to 42 sq in. on factory-built fireplaces and 35 to 52 sq in. on masonry, depending on set size. The flame is yellow by design, so the damper must be fully open when burning and the damper clamp must stay installed. In New York City, gas log installations must be performed by a licensed master plumber with the required permits, and the fireplace and chimney must be approved for use; we confirm this before you buy. Send us your firebox measurements or book a consultation and we will size the set.

Documentation

• Charred Angel Split Oak Manual
• Real Fyre G31 Burner Installation and Owner's Manual

Frequently Asked Questions

How do I choose the size?

Measure the front width, rear width, depth and height of your firebox. The 18/20 in. set needs at least a 28 in. front width and 16 in. depth; each larger size needs a wider opening, as listed above.

Can I use this in a fireplace that does not burn wood?

No. The G31 is a vented decorative appliance and must go in a working solid-fuel burning fireplace with an open chimney.

Which ignition should I pick?

Match lit is the simplest. A standing pilot adds a safety valve, the APK-17 adds a variable-flame remote, and electronic ignition lights the pilot only when needed.

Will it heat my room?

The G31 is certified as a vented decorative appliance. It runs with the damper fully open, so it is designed for the look of a fire rather than as a heat source.

Related reading: Gas Log Set Buying Guide and How to Measure a Fireplace Opening.

Warranty

R.H. Peterson Co. limited warranty, per the G31 manual: vented refractory gas logs are covered for as long as the original purchaser owns them when used indoors (3 years outdoors); indoor vented burners are covered for 10 years, excluding controls; the SPK-26 safety pilot kit for 3 years; the APK-17 kit, including its valve, for 2 years; and all other valves, pilots and controls for 1 year, excluding batteries. Proof of purchase is required, installation must be done by a qualified professional, and labor is not covered.